Helping mark unchartered territories since 1905. Have you marked yours? Hi-Lift jacks are designed to help you survive in the harshest environments - from the Moab desert canyons to the Welsch Mountains and the Amazon Jungle. With over 100 years of quality, the Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring
lifting, pushing, pulling, winching, and clamping. Only Hi-Lift Jacks are made with a two-piece handle and socket design that
is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load. Hi-Lift jacks are designed to help you survive in the most demanding situations
– whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy. When it's a heavy-duty situation, the tool had better be a Hi-Lift!
Hi-Lift X-TREME jacks come with a special winch-clamp-spreader attachment. All cast Iron, made with charcoal metallic powder-coated finish and gold zinc-coated hardware.
Hi-Lift Jack Specifications:
-Approximate weight: 30lbs (14 kg)
-4,660 lbs (2113.74 kg) rated capacity
-Tested capacity 7,000 lbs.
-Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
-Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
-Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 --PSI. 1 5/16" diameter x 30" long.
Hi-Lift Jack Features
-Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
-Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
-For speedy disengaging, lifting unit automatically drops away when load is removed.
-4 1/2" (11cm) long lifting nose for positive contact with load.
-Steel bar can be reversed for extra long life.
-Low pickup of 4 1/2" (11cm).
-28 square inch base plate.
(Heavy weight shipping charge of $9.00 will be added to this Hi Lift Jack)
An all cast construction with a 4,660lb rated capacity. This jack is ideal for Land Rovers with over sized tires and/or raised suspension, where the extra lift from a taller jack is needed.
Hi-Lift Jack Specifications:
-Approximate weight: 30lbs (14 kg)
-4,660 lbs (2113.74 kg) rated capacity
-Tested capacity 7,000 lbs.
-Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
-Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
-Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 --PSI. 1 5/16" diameter x 30" long.
Hi-Lift Jack Features
-Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
-Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
-For speedy disengaging, lifting unit automatically drops away when load is removed.
-4 1/2" (11cm) long lifting nose for positive contact with load.
-Steel bar can be reversed for extra long life.
-Low pickup of 4 1/2" (11cm).
-28 square inch base plate.
(A heavy weight shipping charge will be added to this part at check out)
Hi-Lift X-TREME jacks come with a special winch-clamp-spreader attachment. All cast Iron, made with charcoal metallic powder-coated finish and gold zinc-coated hardware.
Hi-Lift Jack Specifications:
-Approximate weight: 30lbs (14 kg)
-4,660 lbs (2113.74 kg) rated capacity
-Tested capacity 7,000 lbs.
-Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
-Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
-Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 --PSI. 1 5/16" diameter x 30" long.
Hi-Lift Jack Features
-Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
-Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
-For speedy disengaging, lifting unit automatically drops away when load is removed.
-4 1/2" (11cm) long lifting nose for positive contact with load.
-Steel bar can be reversed for extra long life.
-Low pickup of 4 1/2" (11cm).
-28 square inch base plate.
(Heavy weight shipping charge of $9.00 will be added to this Hi Lift Jack)
This base improves the stability of Hi-Lift jacks on soft ground surfaces. This is highly recommended for off- road use in mud and sand, where the cast base of the Hi lift will sink under the weight of your Land Rover. (Base is for Hi-Lift Jacks ONLY)
Mount your Hi-Lift Jack to tube bumpers, bull bars, roll cages or roof rack. Manufactured of 6061-T6 structural aluminum with stainless steel hardware. No drilling required.
Lift Directly from the Wheel - Plastic Bumpers and Extreme Lift-Kits Are No Longer a Problem.
Many trucks and SUV's have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height.
Lift-Mate Features & Specifications:
• Lift Capacity: 5000 lbs. (2273 kg)
• Rubber-Coated hooks to protect the wheel
• Rubber pad for protecting the tire and wheel
This universal locking jack rack can be mounted inside or out, where ever your jack will fit. It can be used on Jackall or Hi Lift jacks. Includes hardware and padlock with keys.
Everything You Need to Winch with the Hi-Lift Jack......All in One Convenient Gear Bag! Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach.
(heavy weight charge will be added at check out)
36" Hi-lift UTV jack.
Join Our Email List